Showing posts with label best bike shop bakersfield. Show all posts
Showing posts with label best bike shop bakersfield. Show all posts

Thursday, August 14, 2014

2015 Cannondale Jekyll Carbon 2 REVIEW

Make no compromises, Cannondale’s Jekyll Carbon 2 soars up  the climbs and charges the descents. 

It’s all thanks to the extremely strong, light Ballistec HI-MOD carbon frame that boasts Fox's revolutionary DYAD rear shock that allows you to choose between 160mm or 95mm of travel to best suit the demands of the trail and your style of riding. Adjusting the travel also changes the geometry, and it's all done by a bar-mounted lever. The front suspension is just as revolutionary, a 1.5-inch head tube keeps the 160mm Cannondale Left SuperMax Carbon fork on your chosen line. Since this enduro sled lets you climb as well as you descend, the fast-shifting, 20-speed SRAM/Shimano drivetrain with stiff SRAM cranks and BB30 bottom bracket has the power to crush every hill, up and down. Other trail-dominating components include Shimano's unbeatable XT brakes, a descent-enhancing KS Lev dropper post, and tubeless-ready Mavic Crossroc wheels that help you to push the Jekyll to the max. 


2015 DYAD RT2 Rear Shock from Cannondale Bicycles on Vimeo.

From Cannondale.com - "The most successful Enduro platform in the world evolves into an all-new race weapon with the 2015 Jekyll. Working with Enduro World Champion Jerome Clementz, we made his winning bike even winning-er with all-new geometry, SuperMax front suspension, a new Fox DYAD rear shock tune with increased travel, and of course, 27.5” wheels. You don’t have to be Jerome to appreciate its perfect-for -Enduro dual nature - you just have to want the most versatile all-mountain bike out there."

TECH

SuperMax is LIGHTER


Weighing in at a scant 1850 grams, the SuperMax 160 is lighter than any of its competitors but what truly sets it apart is its insane stiffness. With rigidity and strength that rivals downhill forks, no other Trail/All-Mountain fork steers as precisely, or descends as confidently as the SuperMax. The only thing bending here is your mind.

SuperMax is STRONGER

Gram for gram, SuperMax is the strongest fork in the world. They punch way above their weight class, going head to head in destructive testing with full-on freeride and DH forks. Cross-Country light meets DH tough.

SuperMax is STIFFER


SuperMax’s massively oversized inverted dual-crown design give it stiffness comparable to the burliest downhill forks, while weighing the same as some XC forks. Light weight efficiency with heavyweight control.

SuperMax is SMOOTHER

The heart of the SuperMax, Cannondale’s patented hybrid needle-bearing technology keeps the suspension moving freely, regardless of load. Even under the hardest braking, impact, and steering forces, the wheel is able to track the ground fluidly for maximum control.

New guts. Now even smoother.


SuperMax PBR Trail/Enduro Damper – The new 2015 damper features a new Wide Mouth Piston which increases oil flow, resulting in improved small bump sensitivity and high speed plushness. These improvements will be especially evident on mid to high speed small, sharp bumps and chatter/braking bump terrain. Low speed compression damping is maintained for optimal chassis stability and minimized pedal bob/brake dive.

SuperMax is LESS MAINTENANCE


The new sealed hybrid bearing system is so robust that it requires around half the regular maintenance of the competition. With its long service intervals and completely replaceable wear-parts, you'll spend less time and money servicing, and more time riding.

Wheel-Size-Specific Axle Offsets


Instead of relying on front suspension companies for off-the-shelf products, we’re able to tailor our forks specifically for each bike platform, creating the most optimized front end geometry and handling possible. SuperMax features wheel-size-specific axle offsets – 60mm on SuperMax 29 and 50mm on SuperMax 27.5, both 10mm longer than their competitors. This increased offset combined with OverMountain’s slack head angles offers the best combination of high speed stability and low speed agility and cornering. The effect is so significant that one magazine reviewer called the Trigger 29 with Supermax "nothing short of revolutionary".

Wide Flange Hub


The new SuperMax Lefty hub features wider flange spacing which allows increased spoke angle for a stronger, stiffer wheel.



ECS-TC 
(Enhanced Center Stiffness-Torsion Control)

Double Clamped 15mm Thru-axles
The ECS-TC system uses 15mm thru-axles for the key pivots. By placing axle bearings in-board and clamping the ends of the axle, the axle becomes a structural part of the link or swingarm. Tying the two sides of the link or swingarm together via the axle in this manner radically increases the system’s ability to resist twisting loads.

Collet Sleeve Bearing Preload
Rather than rely on spacers or washers to take up the space between the links and bearings like other systems, the ECS-TC system has an innovative collet-style preload system. Sitting between the clamp and the axle, the collet sleeves slide into place against the bearing, eliminating any play and allowing perfect centering of the link.

Double-Stacked Rear Dropout Pivot Bearings
At the rear dropout, where the wheel prevents the two pivots from being joined by an axle, we double-stack two bearings side by side in each pivot. This greatly increases the seat stays ability to instantly resist twisting loads, making for an incredibly solid feeling swingarm.

SPECS






8850 Stockdale Hwy.
Bakersfield, CA 93311
(661) 883-6268
info@finishlinebikes.com
www.finishlinebikes.com

Friday, July 25, 2014

2015 Cannondale F-Si Carbon Team 29 - Specs and Features

“While we pride ourselves in building the most cutting edge frames in cycling, our real advantage is in our System Integration approach to bike design,”



said Bob Burbank, Global General Manager, Cannondale. “The 2015 F-Si is for those XC Racers and hardtail purists who are seeking next level handling, speed and efficiency.” (article from bikemag.com)


With a slack head tube angle for race bike of 69.5 degrees, the bike is able to handle rough, technical terrain at high speeds. In the tight, technical sections, the super short chainstays (429 millimeters) helps the rider navigate better at low speeds and puts more weight directly over the rear wheel, resulting in better traction. The wheelbase is 43.2 inches (109.7 cm) on the medium frame and the bottom bracket stands at 12.1 inches (30.8 cm) across all frame sizes. The F-Si 29 Carbon sports quick releases, external cable routing and has been designed to supported the recently debuted Shimano Di2 electronic system. The bike will come in four packages: F-Si 29 Carbon Black Inc., F-Si 29 Carbon Team, F-Si 29 Carbon 1 and F-Si 29 Carbon 2.

The Cannondale F-Si Carbon 29 Team
The Cannondale F-Si Carbon 29 Team

Rather than be limited to off-the-shelf standards, Cannondale has applied its System Integration approach to bike design, which develops component technologies and frames as a complete package.

The Cannondale F-Si is no different, as it has been designed with key innovative technologies such as: the new Lefty 2.0, the SAVE 2 seat and new System 29 Geometry. The bike’s Asymmetric
Integration drivetrain has been moved 6 millimeters outward via a new Hollowgram spider to alleviate any clearance issues due to the new chainstays and is matched by an all-new offset rear end. This means a stiffer, more durable rear wheel as well, as a more agile bike without compromises.
It’s all in the carbon. The team at Cannondale used their Speed Save technology to reduce the amount of shock and vibration, which they say helps cut down fatigue and improves overall handling of the bike. The carbon is layered using BallisTec Carbon, which was originally created by the military for ballistic armoring, and uses resins found in carbon baseball bats. The result, according to Cannondale, is one of the lightest, stiffest and toughest frames out there.

See the bike in action:






8850 Stockdale Hwy.
Bakersfield, CA 93311
(661) 883-6268
info@finishlinebikes.com
www.finishlinebikes.com

Friday, July 11, 2014

[Cycling Tips] Develop Your Riding Technique With 15 Easy Tips

Follow One or All of These Tips To Enjoy Your Ride That Much More


1. To avoid muscle soreness and fatigue, don't hunch your shoulders. Tilt your head every few minutes to stave off tight neck muscles. Better yet: stop to admire the scenery







2. If you don't have a chance to slow for an obstacle such as railroad tracks or a pothole, quickly pull upward on the handlebar to lift your front wheel. You may still damage the rear wheel, or it might suffer a pinch flat, but you'll prevent an impact on the front that could cause a crash.

3. Relax your grip. On smooth, traffic-free pavement, practice draping your hands over the handlebar. This not only will help alleviate muscle tension, but also will reduce the amount of road vibration transmitted to your body.

4. Periodically change hand position. Grasp the drops for descents or high-speed riding and the brake lever hoods for relaxed cruising. On long climbs, hold the top of the bar to sit upright and open your chest for easier breathing. When standing, grasp the hoods lightly and gently rock the bike from side to side in sync with your pedal strokes. But always keep each thumb and a finger closed around the hood or bar to prevent yourself from losing control if you hit an unexpected bump.

5. As your effort becomes harder, increase the force of your breaths rather than the frequency.


6. Stay far enough in the traffic lane to avoid being struck if doors on parked cars suddenly open. You'll likely hear some honks from motorists who don't understand why you won't pull to the right to let them pass— a honk in your ear hurts less than a door in your face.

7. On descents, your bike is much more stable when you're pedaling than when you're coasting.

8. Always ride with your elbows bent and your arms and shoulders relaxed. This prevents fatigue caused by muscle tension. It also allows your arms to absorb shock instead of transmitting it to your body.

9. When riding one-handed for any reason, grip the bar on top, next to the stem. If your hand is farther out - such as on the brake-lever hood - the bike is more likely to veer dangerously should the front wheel hit a rock, bump, or pothole

10. Get more life from your tires by switching them from one wheel to another. The rear wears more than twice as fast as the front, so swapping every 500 miles or so significantly extends their longevity.

11. Break up long rides with a 15-second sprint every 30 minutes or so- adding variety to a monotonous pace is better training, relieves saddle pressure, and stretches and relaxes your body.

12. After you grab your water bottle, don't tilt your head to drink. Tilt the bottle and squeeze the water in. You'll have more control.


13. The key to smooth, reliable, non-damaging gear changes when you're pushing hard is to ease your pedal pressure at the instant you move the shift lever. You need to lighten the load on the chain for about one revolution so it won't balk, crunch, or possibly break. Then hit the power again.

Read Our Post About Pedaling Efficiency

14. For optimal handling with 20 pounds or more of cargo, put approximately 60 percent of the weight in the rear panniers or on a rack, 35 percent on the front rack or panniers, and 5 percent in a handlebar bag.

15. Two easy and most overlooked ways to improve your bike's performance: Inflate the tires before every ride, and keep the chain lubed.


Finish Line Bikes
8850 Stockdale Hwy.
Bakersfield, CA 93311
(661) 883-6268
info@finishlinebikes.com
www.finishlinebikes.com



Friday, June 27, 2014

2015 Cannondale Trigger 27.5 Carbon Black Inc. [Features and Specs]

The Most Versatile of Cannondale's Bikes Ever Made and the Only Bike You Need in Your Garage. 


Unlike other so-called “quiver killers” the all-new Trigger doesn’t need to compromise between too much travel and too little, too steep geometry, or too slack. Its new and improved Fox DYAD rear shock gives the rider the perfect travel and geometry for whatever terrain they’re attacking.





Attitude Adjust

Adjustable Geometry

One of the key functions of the DYAD rear shock is that it enables the rider to adapt the geometry of the bike on-the-fly for the best climbing or descending experience. We call this Attitude Adjust. In Elevate Mode, the geometry is steeper for a more efficient pedaling position and better front-end control on steep climbs. In Flow Mode, the geometry gets lower and slacker to attack aggressive descents. 

 



SuperMax

The Bigger, Badder Lefty


Everything that makes our tried-and-true Lefty great is what makes SuperMax the best performing fork in its category. It’s lighter, stiffer, stronger, smoother and less maintenance than the competition. You simply can’t beat that. 






 

BallisTec

Carbon

BallisTec is Cannondale's high-strength, high-stiffness carbon construction. It starts with a base structure composed of ultra-strong fibers originally created by the military for ballistic armoring, and high-strength, high-impact resins similar to what is used in the construction of carbon baseball bats. Ride-feel tuning and stiffness comes from precision addition of high and ultra-high modulus fibers and the result is some of lightest, stiffest and toughest frames out there.






DYAD

The World’s Only True 2-in-1 Shock

DYAD’s unique dual-shock technology lets you transform your bike on the fly from long travel to short travel and back again, depending on your mood and whatever the trail is throwing your way. Where other bikes are forced to use one middle-of-the-road travel and geometry for both climbing and descending, DYAD doesn’t compromise. With its dual modes, Elevate and Flow, it delivers the right shock response and the right geometry at the right moment.







ECS-TC

Pivot System

The more laterally stiff a frame is, the better it responds to rider input. A stiffer bike pedals more efficiently and corners more precisely. On many bikes links, bearings and axles flex and rotate relative to each other, and these small factors all combine to negatively influence lateral stiffness. We solved this with our patented ECS-TC™ system.






Frame: Trigger 27.5, 140/85mm, BallisTec Hi-MOD Carbon, PF30, ISCG03, 1.5 Si headtube
Fork: SuperMax Carbon PBR 2.0 140 27.5, w/ Hybrid Needle Bearing Tech, 50mm offset
Rear Shock: Fox DYAD RT2 140/85mm adj. travel 2015 tune
Crank: Cannondale HollowGram SiSL2 BB30A XX1 30T w/MRP 1x guide
Bottom Bracket: Cannondale Alloy PressFit30
Shifters: SSRAM XX1 11 Speed
Cog Set: SRAM XX1 10-42 11-speed
Chain: SRAM XX1
Rear Derailleur: SRAM XX1
Rims: ENVE Carbon 650 AM tubeless ready
Hubs: Lefty SM front - DT-Swiss 350 rear hub rear 32 hole
Tires: Schwalbe Racing Ralph Evo SnakeSkin 27.5x2.25inch tubeless ready
Brakes: Magura MT8 w/ Storm SL rotors 180/160mm
Handlebar: ENVE Comp Flat carbon 740mm
Stem: Cannondale C1 1.5inch 31.8 5 deg.
Headset: Cannondale HeadShok Si
Spokes: DT Swiss AeroLite
Grips: Cannondale Foam Locking Grips
Saddle: WTB Silverado Carbon
Seat Post: RockShox Reverb Stealth dropper 31.6




8850 Stockdale Hwy.
Bakersfield, CA 93311
(661) 883-6268
info@finishlinebikes.com
www.finishlinebikes.com

Friday, June 20, 2014

Disc Brakes 101 - Bike Maintenance Tips from Finish Line Bikes


Trickling down from the motocross world, disc brakes have now become popular on off-road bicycles. Discs provide powerful and reliable braking in all types of weather and terrain so they're ideal for trail riding. Plus, unlike rim brakes, discs aren't compromised should you hit a hole or land hard and bend your wheel.

There are significant differences between discs and rim brakes, however. So here we provide an overview of how discs work, the different types, and basic maintenance instructions.

disc brake rotor
Disc brakes generate amazing stopping power even in the worst conditions because they utilize rotors (photo) attached to the wheel hubs, and calipers attached to the frame containing specially designed pads (also called "brake shoes").

Unlike the soft rubber pads used on rim brakes, discs use hard metallic- or ceramic-based pads that are less affected by water, mud and heat to achieve more consistent braking power. Additionally, some disc brakes use hydraulics (instead of cables); for even greater stopping power.

Types

Mechanical Disc Brakes
Mechanical discs use the same cables and housing found on traditional cantilevers and V-brakes. Cables offer certain advantages over hydraulic systems, including simpler installation and adjustment, lighter weight, and less complicated maintenance (cables can be found at any bike shop and are less expensive than hydraulic lines).

The main drawback to mechanical brakes is cable stretch, which causes a spongy feel, reduces braking power, and forces more frequent adjustment. Cables and housing are also susceptible to rust, dirt, and debris buildup that can bind the braking system.

These problems are completely avoidable though. And the basic maintenance tips that we offer here will keep your mechanical discs strong and reliable.

Hydraulic Disc Brakes
Hydraulic Disc BrakeHydraulic discs feature a closed system of hoses and reservoirs containing special hydraulic fluid to operate the brakes. When the lever is activated, a plunger pushes the fluid through the hoses and into the caliper where the pads are pushed onto the rotor, stopping the bike.

The advantage of hydraulic systems is being sealed (or "closed") so that water, dirt or debris can't compromise the brakes, making them very maintenance free once they've been properly installed. Also, hydraulic brakes have a silky smooth feel at the lever and incredible gripping power at the business end.

For drawbacks, hydraulic brakes must withstand extremely high pressure, so expert set-up and frequent inspections are essential. The smallest air bubble or leak in hydraulic discs can cause a loss of power or complete failure. And, the process of removing air from the braking system, called "bleeding," varies between individual systems and can be a delicate process. So it's best to bring your bike in and have us help.

The Two Types of Calipers

Maintenance and Troubleshooting

NOTE: While disc brakes work wonderfully even in extreme conditions, it's still important to keep them in tip-top shape. Following are basic suggestions. Different types of discs may require specific maintenance not covered here. One basic tip isbe careful not to squeeze your brake lever when removing your wheels. The pads will contract and you won't be able to get the wheel back in.

Also, when replacing any parts or fluids, it's crucial to make sure everything is compatible. And, because brakes are so important for safety, we do not recommend working on them unless you’re confident in your ability to do the job right.

If you have any questions about disc brake adjustment please call or bring your bike in and we'll be happy to help.

Inspecting And Cleaning The RotorsDirty, warped, cracked or otherwise damaged rotors are a common cause of brake failure. Rotors are rarely perfect, but if you find excessive wobbling (more than 1mm), cracks or gouges in your rotors, replace them immediately.

A significant loss of braking power can also be caused by dirty or oily rotors or pads. Clean rotors and pads using only isopropyl alcohol. Other cleaners/degreasers can contaminate and damage the rotors or pads. If cleaning does not restore your braking power, replace the pads immediately.

Squealing or noisy brakes is another common problem. It can be caused by loose bolts so start by checking all the bolts on the rotors and those attaching the calipers to the bike. Dirty pads may cause noise, too, so keep them clean. Still squealing? Check the alignment of the calipers over the rotors (see "centering the calipers" below).

To check the rotors for dents or warping, spin the wheel and watch the rotors as they rotate past the pads. As long as the rotor does not rub, a slight lateral movement is acceptable. If the rotor rubs the pad in a spot, tap it lightly with a rubber or plastic hammer, or place a clean rag over the rotor and bend it slightly with an adjustable wrench. It doesn't take much, so don't overdo it! And remember: Never touch the braking surface of the rotor or pads with your bare hands because the oils on your fingers can decrease braking power.
Adjusting Lever ReachMany new brake systems include adjustable-reach levers that allow customizing the distance from the handlebar grip to the brake lever. This usually involves turning a screw or bolt that connects the brake lever to the body.

If the reach distance to each lever is uneven or one lever pulls farther than the other, try to equal out the travel by dialing the lever limit screws in or out (call or check your owner's manual for specific instructions). If the lever still feels spongy or pulls all the way to the bar, there may be air in the hydraulics. Time to bring it in and have us bleed the system. Finally, inspect all of the hydraulic hoses and fittings for leaks. If you find a leak, bring your bike in to us immediately.

Checking Brake Pad Wear
Removal: With the wheels removed, use your fingers or needle-nose pliers to grab the removal tabs extending below the inner brake pad (photo). Depending on the brake system that you're using, pull one or both pads straight out and toward the center of the caliper body until they're completely removed. The pads may also have retaining springs or magnets holding them in place that may come out.

Inspection: If the remaining padding is thinner than the thickness of a nickel, you'll need new pads after a few more rides. If the pads are thinner than a dime, change them immediately. Insert the new pads into the caliper body the same way they were removed, making sure that the pads sit fully inside the caliper body. Warning: Do not touch or spill any fluids on the pads as skin oils or other fluids can cause a loss of braking power.

Centering The Calipers (Preventing Brake Drag)
The rotors need to be centered in the calipers to maximize braking power, eliminate drag and minimize noise.

Some brakes use shims or thin washers on the caliper mounting bolts. For these brakes, add or remove shims to center the caliper over the rotor.

Another popular mounting system uses a two-part bracket. To adjust the caliper position on these brakes, loosen the two centering bolts that attach the caliper to the mounting bracket, apply the brake lever and tighten the bolts. Hint: Try slipping business cards between the rotor and pads before applying the brakes to help center the calipers.

While applying the brake, it may also help to gently shake the caliper body so it comes to rest in a centered position, then tighten the mounting bolts. Finally, spin the wheel and check if the rotor is centered. Repeat the adjustments if necessary.
Pre-Ride Check List
  • Inspect the brake rotors for dirt, debris, or fluids. Clean with alcohol if necessary.
  • Spin both wheels and make sure the brake rotors are straight and not rubbing on the pads.
  • Squeeze both brake levers to check for proper lever travel and solid pad contact with rotors.
  • Inspect all hydraulic hoses and fittings for leaks once a week and before each ride.
Now Go Ride!


 

8850 Stockdale Hwy.
Bakersfield, CA 93311
(661) 883-6268
info@finishlinebikes.com
www.finishlinebikes.com

Friday, June 6, 2014

Tips To Better Drivetrain Care

Preserve Your Drivetrain, Handle Shifts With Ease


Learning to use the equipment that comes with your bike is extremely important, as it will help you to enjoy your ride more as well as extend the life of those parts. Shifting is no exception, and we have a few tips to help you improve that aspect of your riding.

An important rule to remember is to - reduce your applied pressure on the pedals during shifts. As drivetrains have improved over the years, the have been designed to shift no matter how much pressure is put on the pedals. However, if you ease up on the pressure just a bit, the shifts will be smoother and your chain, cogs and chainrings will last longer.

Here are some more tips to help keep your drivetrain in great working order:

Keeping Your Drivetrain Clean:

Before we even get into proper shifting, it is important to make sure you keep your drivetrain clean and tuned up to extend the life of your drivetrain. We have chain cleaners for sale in the shop that can help get your chain clean and keep it that way.

Every six months or so, inspect your chain and measure to see if it has been stretching.

Pick a chain pin on the top side and measure to any pin 12 inches away. Links are exactly one-inch long, so you should be able to measure exactly 12 inches between two pins. If the measurement is 12 1/8 inch or longer, it's time to replace the chain.

(Check Your Cogs too!)
Remember: cogs wear out at about the same rate as the chain. If you put on a new chain, you will eventually run into skipping cogs - which is at best annoying and at worst dangerous!

Remember to keep the front rings and rear cogs clean. Stay on the lookout for a post about how to clean your chain and drivetrain!

On The Road Tips:

Shift Before Hills:

Even though the hardest place to put less pressure on your pedals is when you are struggling to get up a steep hill. Try changing gears before the steep part of the hill so you can make the shift with out stressing the chain and pedals.

Front Shifts:

Remember when you are shifting the front derailleur that the chainrings are significantly different in size! This means your derailleur has to work hard to move the chain from one to the other. If you can add some finesse to this shift, you are much more likely to get a clean, smooth shift. And, you'll eliminate problems associated with high pressure shifts such as having the chain come off.

There are three or four set spots (shift ramps/shift gates) on the chainrings to make it shift. The chain (while moving forward) needs to contact these ramps to be pulled up onto or down over the chainring. It is very important to hold the shift until the chain comes into contact with a shift ramp. When the chain is under load (meaning there is force on the pedals) this is the ony spot where the chain will shift. Ideally shifting should be done with little load on the chain. When the chain is under load the derailleur will just flex and laugh at you instead of making the shift happen. When there is no load on the chain the derailleur will be able to move it.


Getting Your Chain BACK On:

Usually, you can shift the chain right back on the chainring if it falls off. This is usually impossible when climbing a hill, as you will lose momentum and have to stop. However, any time you are riding and you can coast for a few seconds, you can almost always get the chain back on by gently pedaling and shifting the front derailleur to move the chain toward the ring.

(When a chain comes off repeatedly, something is wrong and you should have us take a look at the front derailleur adjustment.)

Come to Finish Line Bikes in Bakersfield, CA for all your cycling needs! We are located at:

8850 Stockdale Hwy.
Bakersfield, CA 93311
(661) 883-6268
info@finishlinebikes.com
www.finishlinebikes.com

Wednesday, June 4, 2014

23 Most Common Bike Problems

Bike Making Loud Noises You Can't Explain? We Have The Solutions.



1. You fixed a puncture, and the new tube keeps going flat




If the holes in the tube are in the
bottom, the rim strip may be out of position, allowing the tube to get cut by the spokes. If they're on top, there may be some small sharp object stuck in the tire. Find it by running your fingers lightly around the inside of the tire, then remove it.


 

 

2. A remounted tire won't sit right on the rim

Let the air out, wiggle the bad spot around, reinflate to about 30 psi, and roll the bad spot into place with your hands. By pushing the tire in toward the middle of the rim you will be able to see if any of the tube is poking out. When the tube is fully inside the tire, inflate as normal.

3. A patch won't stick to the glue on the tube

Apply more glue and let it dry completely, about five minutes (DO NOT BLOW ON THE GLUE) When you apply the patch, avoid touching its sticky side with your fingers.

4. A creaking sound from the wheels

A spoke may have loosened. If tension is uniform, the sound might be caused by a slight motion of the spokes against each other where they cross. Lightly lube this junction, wiping off the excess.

5. A creaking sound when you pedal
Tighten the crankarm bolts. If the arm still creaks, remove it, apply a trace of grease to the spindle, and reinstall the arm.

6. The large chainring flexes, and the chain rubs against the front derailleur cage.

Check for loose chainring bolts

7. You have removed the chainrings to clean the crankset, but now the front derailleur doesn't shift right. 

You may have installed a chainring backward. Remove the rings and put them on correctly. Usually, the crankarm bolts fit into indentations on the chainrings. Sight from above too, to make sure there's even spacing between the rings.

8. While trying to remove or adjust a crankarm you stripped the threads- Now you can't remove it

Ride your bike around the block a few times. The crankarm will loosen and you'll be able to pull it off.

9. Shifter housing rubs the frame, wearing a spot in the frame

Put clear tape beneath the housings where they rub.

10. Noisy sloppy shifting can't be remedied by rear derailleur adjustment

The cassette lockring might be loose, allowing the cogs to move slightly and rattle around on the hub. You need a special tool to tighten the lockring fully, but you can spin it tight enough with your fingers to ride safely home or to a stop.

11. The cog cassette is getting rusty

A little rust won't damage the cogs quickly, so it's not a major concern. Usually, using a little more lube will prevent additional rust, and riding will cause the chain to wear away the rust while you're pedaling.

 

12. In certain gears, pedaling cause loud skipping

There may be debris between the cogs. If you can see mud, grass, leaves, twigs, or any sort of foreign matter trapped between cogs, dig it out. It's probably keeping the chain from settling all the way down onto the cog to achieve a proper mesh. If there's no debris, a cog is probably worn out. Most often this is a sign that the chain and cassette will have to be replaced.

13. Front derailleur won't shift precisely to a chainring

Check that the cage is parallel to the chainrings (when viewed from above), and loosen and reposition the derailleur if necessary. If it's parallel, you probably need to adjust the high- and low-limit screws, best done by a shop.

14. The rear derailleur makes a constant squeaking noise

The pulleys are dry and need lubrication. Drip some light lube on the sides, then wipe off the excess.

15. Braking feels mushy, even though the pads aren't worn out

The cable probably stretched. Dial out the brake-adjuster barrel (found either on the caliper or on the housing closer to the lever) by turning it counterclockwise until the pads are close enough to the rim to make the braking action feel as tight as you want.

16. Braking feels grabby

You probably have a ding or dent in the rim. This hits the pad every revolution, causing the unnerving situation. Take your bike into the shop.

17. One pad drags against the rim or stays significantly closer to the rim than the other

Before messing with the brakes, open the quick-release on the wheel, recenter the wheel in the frame and see if that fixes the problem. (This is the most common solution.) If the wheel is centered but a pad still rubs, you need to recenter the brake. On most modern brakesets this is done by turning a small adjustment screw found somewhere on the side or top of the caliper. (There may be one screw on each side, as well.) Turn the screw or screws in small increments, watching to see how this affects the pad position. If you center the brake and the wheel, and a pad still drags on the rim, it probably wore unevenly from being misadjusted; sand the pads flat and recenter everything. 

18. With each pedal stroke you hear a click coming from the saddle

The pedal may have loosened. Tighten it.

19. Squealing Brakes

Wipe the rim to remove any oil or cleaning reside. If this doesn't work, scuff the pads with sandpaper or a file. Still noisy? The pads need to be loosened, then toed in; an adjustment that makes the front portion touch the rim before the back- an easy fix for a shop, a tortuous process for a first timer.

20. Creaking Saddle

Dip a tiny amount of oil around the rails where they enter the saddle, and into the clamp where it grips the rails. Heritage purists take note: Leather saddles sometimes creak the same way that fine leather shoes can. There's not much you can do about this.

21. You can never remember which way to turn the pedals

Treat the right-side pedal normally — righty-tighty, lefty-loosey. The left side pedal has reverse threads (to keep it from unscrewing during pedaling). If that's confusing, just remember this simple phrase: Back off. This can remind you that, with the wrench engaged above the pedal, you ALWAYS turn toward the back of the bike to remove the pedal. 

22. You installed a pedal into the wrong crankarm - The left pedal into the right arm or vice versa

You can remove the pedal, but the crankarm will have to be replaced; its threads are softer than the pedal's and are now stripped out. ALWAYS check the pedals before installing. There is usually an R for right or an L for left stamped onto the axle. 

23. You pulled apart your headset to regrease it, and now the headset feels tight no matter how you adjust it

The bearing retainers are probably in upside down.


Come to Finish Line Bikes for all your maintenance needs.
We are located at 8850 Stockdale Hwy. in Bakersfield, CA. 
You can reach us by phone at (661) 833-6268

Tuesday, May 27, 2014

2014 Colnago CX Zero Disc - Brand New Platform

The 2014 Colnago CX Zero Disc  is a pro-level carbon-fiber bike made for long rides, hard rides, and rough roads. 



As a result, compliance and stability are designed in. While the bike works great on rough roads, the benefits of the design work great on smooth roads as well. The road feedback is blunted and whatever lumps you ride over are absorbed by the frame. The result is greater comfort and less fatigue. Even with this factored in, the bike is still designed for throwing power down to the pedals, with incredible torsional stiffness thanks to the first-ever Colnago BB86 bottom bracket shell and the tapered 1 1/8" to 1 1/4" steerer tube.

Here are some of the key features of the 2014 Colnago CX Zero Disc.




The CX Zero Disc is a rarity in the bike world, a road bike built around rotor disc brakes. No doubt there will be more in the future, but Colnago had been eyeing the technology for some time and working on how to best mate discs with a road frameset. This is their answer.


Image Credit: road.cc
The lay-up and shapes reflect the forces that not only what heavy braking does by the hub, but how human power from above and the road from below affect the ride. As the intermediary to the road, the bike was designed to be ridden fast, with a confident, stable, comfortable mien. To maximize comfort, the chain stays are curved and taper dramatically as they move toward the dropouts, the seat stays are thin, and a 27.2mm seat post is used. To maximize efficiency, Colnago employs a BB86 bottom bracket, a massive bb shell area, and a 1 1/8" to 1 1/4" tapered steerer.

Going with mechanical Shimano Ultegra means you have more tactile sensation while pounding rough roads. You'll have an easier time locating the shifts under heavy gloves. They limit your choice of brake to cable-pulled disc brakes, but Shimano's BR-R515 & SM-RT99 calipers, but to compensate for the reduced power, Colnago puts an adapter on the fork and installs a 160mm rotor. The rear remains 140mm.
 
Ultegra shifting and cranks offer pro-level performance on an amateur's salary. The ergonomics and feel are the same. The 50/30 compact chain rings and 11-25 eleven speed cassette offer a wide, tightly-spaced range of gears.

This is a bike designed to last as long as the ancient roads that support classic racing. While this bike is configured for mechanical shifting, it can easily be switched for electronic, with the battery run either externally or internally.

The Colnago CX Zero Disc Ultegra bike gets you an endurance ride that punches above its weight.

Come in today to see all the great bikes we have to offer from Giant, Cervelo, and Cannondale!



8850 Stockdale Hwy.
Bakersfield, CA 93311
(661) 883-6268
info@finishlinebikes.com
www.finishlinebikes.com

Monday, May 19, 2014

Top Ways To Increase Pedaling Efficiency


 The Number One Rule Is: PRACTICE!



One pedaling drill you can do on any ride with downhills is spinning the pedals as quickly as possible as you accelerate down slopes. To do this correctly, leave the bike in a gear that's too easy, one that forces you to fan the pedals to keep up with the speed of the bike. Your goal is to rev your legs as quickly as you can while remaining seated. At first, you'll probably bounce a lot on the seat. But, with practice, you should be able to stay in the seat and maintain a calm upper body even though your legs are spinning at supersonic speed. If you do this drill a lot, your pedaling speed and efficiency will quickly improve.





Try Rollers
If you're willing to purchase a handy piece of cycling equipment, a great way to smooth your spin is to train indoors on rollers. Rollers consist of a frame with three spinning drums (one for the front wheel, two for the rear), with a rubber belt connecting the front drum to one of the rear drums. You put your bike on the rollers and start to pedal and you can balance and ride just like you do spinning down the road outside. Most rollers have optional equipment that allows increasing resistance because there isn't much drag from just the roller unit itself.


From bicycling.com

Hip-Knee-Ankle Alignment


Viewed from the top, your hip, knee and ankle should line up throughout the pedal stroke. If you can't correct this, or experience knee pain when you try to restrict lateral movement, you may need orthotics or another type of biomechanical adjustment.




Zone 1

Reference Picture Above For Zones



Known as the power phase, the portion of the pedal stroke from 12 o'clock to about 5 o'clock is the period of greatest muscle activity. Todd Carver, a biomechanist at Colorado's Boulder Center for Sports Medicine comments: "A lot of people think hamstrings are used only on the upstroke, but a good cyclist uses a lot of hamstring in the downstroke, because it extends the hip." The key to accessing the large muscles in the back of your leg is dropping your heel down as you come over the top of the stroke." He says. "At 12 o'clock, your toes should be pointed down about 20 degrees, but as you come over the top, start dropping your heel so that it's parallel to the ground or even 10 degrees past parallel by the time you get to 3 o'clock.

Zone 2

Using the same muscles as in the power phase, but to a lesser degree, this phase acts as a transition to the backstroke. "As you enter Zone 2, think about firing the calf muscles to point your toe." Carter says. As you come through the bottom of the stroke, the toe should be pointed down 20 degrees. "This ankling technique transfers some of the energy developed in Zone 1 by the bigger muscles to the crank," Carver says. He uses the advice popularized by Greg Lemond: "Act like you're scraping mud off the bottom of your shoe"  

Zone 3

Even though you feel like you're  pulling your foot through the back of the stroke, you're not. "When you look at even the best cyclists, they're losing power on the upstroke," says Carver. "The pedal is actually pushing your leg up, so the goal is to lose as little power as possible and get that foot out of the way"

Zone 4

As you enter the second half of the upstroke phase, think about initiating your downstroke. A tip: As you begin to come across the top of the stroke, think about pushing your knee forward, toward the bar. But only your knee, says Carver: "Your pelvis should remain a stable platform, not sinking down and not moving forward.


Forced Spinning 

 A classic cycling trick to improve pedaling technique is riding a fixed-gear bike in the winter. Constant pedaling is required because you can't coast. And you must accelerate pedal speed on downhills because you can't shift. These factors combine to smooth your pedal stroke and force you to spin complete circles. Pick ride routes that avoid steep climbs and descents. You don't need to buy a new bike to pull this one off, either. A threaded-hub wheel, a track cog, a BMX chain and a few axle spacing tricks can turn your regular bike into a fixed-gear rig. We can help with the conversion.

 

LA Velodrome

Try The Track
If you're one of the privileged few who can ride a track bike at a velodrome (a circular, banked track for cycling), you'll reap the same benefits as training on a fixed-gear bike. Never ride a track bike on the road, though. Brakes are a must on the street, and track bikes don't have them.









Did You Enjoy This Post? Check Out this one on Drivetrain Preservation

Come Visit Us At Finish Line Bikes! We'd Love To Help You Find The Best Bike For You!

Finish Line Bikes
8850 Stockdale Hwy.
Bakersfield, CA 93311
(661) 883-6268
info@finishlinebikes.com
www.finishlinebikes.com

Monday, April 28, 2014

Drastically Reduced Prices on the Following 2014 Giant Bicycle Models.

2014 Giant Escape 2

You will not find a better price on a high quality bike for under $430, ANYWHERE.

SEE LIST OF BIKES BELOW


If you’re already fitness-minded – one of those people who go to the gym or to yoga class regularly but thought bicycling was just too expensive to add into your fitness routine – well, now you no longer have an excuse.

Or, if you’re one of those folks who wants to get active now, but are put off by what you believe to be a high-priced sport only for the spandex-clad bike racer, you don’t have an excuse anymore either!
 
1. Top quality. Giant is the world’s leading brand of quality bicycles and gear. We aim to inspire adventure in all riders, from casual to competitive.

2. Professionally assembled.
Your independent bicycle retailer is an expert at building bikes. They are trained to assemble your new bike with your safety in mind. Who assembles your bike at the big box store?

3. The right size.
Most big box stores sell one size of bicycle – and they cross their fingers hoping you believe it fits. Giant and Liv/giant bicycles come in a complete range of men’s and women’s sizes, and your bicycle retailer will make sure the bike you buy is the right fit for you.

4. Expertly maintained.
Your Giant and Liv/giant retailer has a service area dedicated to keeping your Gateway to Adventure bike rolling perfectly. They also have a terrific selection of accessories for you and your bike to help you get the most out of your new ride.

With your new Gateway to Adventure bike, you’ll feel great knowing you’re on the road to a more active lifestyle. You’ll also feel good knowing you’re supporting your local independent bicycle retailer – a business owned by folks from your community. These are people who have created good paying jobs and pay tax dollars to your state and town. Thank you for supporting them!

GIANT GATEWAY TO ADVENTURE BIKES:

Escape 2 ..................................................  $420
Escape 3 ..................................................  $330
Cypress DX .............................................  $420
Cypress ....................................................  $320
Roam 3 ....................................................  $430
Sedona DX ..............................................  $420
Sedona .....................................................  $320
Revel 2 ....................................................  $400
Revel 3 ....................................................  $330



Liv/giant GATEWAY TO ADVENTURE BIKES:

Escape 2 W .............................................  $420
Escape 3 W .............................................  $330
Cypress DX W  .......................................  $420
Cypress W ...............................................  $320
Enchant 1 .................................................  $390
Enchant 2 .................................................  $430
Sedona DX W ..........................................  $420
Sedona W .................................................  $320
Rove 3 ......................................................  $430

Friday, March 28, 2014

2014 Giant Defy Advanced 2 — Simply One Of The Best of Its Type

Cycling Plus Bike of The Year Finalist — "With a perfect 5 stars, Cycling Plus fell in love with Defy Advanced all over again in 2014"


"..we really do love the Giant Defy Advanced 2. Last year we crowned it best of the best, and in 2014 it's still got it... we've yet to find a rider who doesn't get on with the Defy the moment they turn the pedals."

Testers noted that Defy Advanced is now better than ever - maintaining the perfect formula that saw it win Bike of The Year, while offering greater value in 2014 with a new lower price;

"By sticking with a winning formula and lowering the price, Giant have arguably made the Defy even better. This year you're getting more bike for your money than you did last. What's not to like?" 

- Giant-Bicycles.com 



The frame is — quite simply — superb. It handles wonderfully, exciting to ride, yet incredibly comfortable. Giant has done a great job selecting the right drivetrain for this bike. Comes with an industry standard 50/34 chainset up front, but in back it comes with a nice wide set of gears with a 28 tooth bottom gear which will pretty much get you up any hill. On the non-drive side chainstay is Giant's ANT+ device for seamless and wireless communication with your Garmin, measuring both cadence and speed.


It's got a great Shimano 105 spec, Giant PSL wheelset, Fi'zi:k saddle - and this year the price has been brought down just a bit.

Technologies
1. OverDrive 2

Designed to offer unprecedented front-end steering performance, the system’s oversized headset bearings (1 1/2” lower, 1 1/4” upper) and tapered steerer tube work in harmony to provide supreme steering stiffness.


2. Modified Monocoque

Construction Similar to Monocoque technology, but Modified Monocoque eliminates the outermost woven composite sheet (found on heavier framesets) to reduce weight without affecting ride quality, strength or stiffness.

3. PowerCore

A massively oversized bottom-bracket/chainstay features a fully integrated, 86-millimetre-wide bottom-bracket design. Asymmetric chainstays provide additional stiffness on the driveside and stability on the non-driveside.

4. MegaDrive

A massive rectangular downtube and oversized toptube work in unison to provide superior front-end lateral and torsional steering precision. The precisely engineered, rectangular shaped downtube yields unprecedented pedalling stiffness.

5. Vector Seatpost

This full-composite, lightweight (210 grams) and highly aerodynamic seatpost is engineered specifically for the unyielding demands of the performance-minded road rider. It offers increased fore/aft stiffness for maximum energy transmission, improved aerodynamics (compared to a traditional round seatpost) and two offset options (-5 to +25mm).

6. Tuned Composite

Hand-cut composite swatches are strategically laidup, piece by piece, to create each frame. The frame’s ride qualities are meticulously crafted and controlled through precise layering of each individual swatch (there are more than 500 pieces per frame) in an exact schedule. The direction of each individual piece’s composite grain allows Giant engineers to custom tune each frame’s individual ride characteristics.

7. RideSense

Giant’s all-new chainstay integrated, wireless data transmitter. The fully integrated, removable transmitter sends wheelspeed and cadence information directly to any ANT+ compatible computer.

8. Compliant Seatstays

The seattube/seatstay junction has been engineered to provide integrated compliance into the rear of the bike by producing a leaf-spring effect that absorbs road shock and vibrations.

Finish Line Bikes
8850 Stockdale Hwy.
Bakersfield, CA 93311
(661) 883-6268
info@finishlinebikes.com
www.finishlinebikes.com

Wednesday, March 26, 2014

All About Lighting Systems - How To Choose The Best One For You


Safer Night Riding Begins With Good Lighting



Modern high-end light systems offer enough brightness to give your riding companions sunburn (kidding!). And, they come in a wide variety of price points. But, how much light is needed for safe road or off-road riding?We have a wide assortment of bicycle lights for every purpose!

Light It Up

To illuminate the road or trail ahead for your own eyes, not just to be seen at night by others, 10 watts is a good starting point. In general, the greater the headlight's wattage, the brighter the light. There are also systems with yellow and white light, the latter being brighter at the same wattage.

 
Find The Right Features

Modern lighting systems are packed with features. There are twin- and single-beam headlight systems. There are different battery types (rechargeables are found on better lights). There are ingenious quick-release mounts so you can install and remove the light in a blink. Most lights offer high- and low-beam options like your car (use the high beam for downhills, pitch-black woods, high speed and intersections). There are even computerized light systems on which battery usage and light output is controlled via microchip.

Trail Torch

The ultimate trail setup is having one handlebar light and another on your helmet. The head-mounted light illuminates your field of vision and is especially handy for following bends in the trail because it moves with you as you turn to look (just don't look directly at friends when riding because you'll blind them for a few seconds). Meanwhile, the bar-mounted beam allows monitoring conditions directly in front of the bike for bumps, roots and trail irregularities.

Portable Power

High-watt light systems require large amounts of power so battery systems have gotten very sophisticated. In ascending order of cost, bicycle lighting systems use lead-acid batteries, Nickel-Cadmium (NiCad) batteries, and Nickel-Metal-Hydride (NiMH) batteries. NiCad batteries are lighter and less susceptible to power loss at high or low temperatures than lead-acid, and will last many more recharge cycles. NiMH batteries weigh 30% less than NiCad batteries and offer similar run-times and durability. Proper care and feeding of your battery must be followed to insure you get maximum battery life. Always follow the manufacturer's instructions regarding charging and use of any rechargeable battery.

Night Rides Can Be The Best Rides

Having a good light means you can ride safely at night, which is sometimes the best time to ride. It's after car-commuting hours so the roads are less busy. The sun's gone down, so it's often the most comfortable time of day, too. And, at night, off-road riding can be magical. The best way to decide on a lighting system is to come in and look at some to compare features and cost. Which one is best for you really depends on how and where you plan to use it and how much you'd like to spend. If you can answer these questions, we can help you pick the perfect light.


Stay tuned to our blog for more cycling tips like this one, as well as bike reviews, cycling news, events and more!

www.finishlinebikes.com 

 

Finish Line Bikes
8850 Stockdale Hwy.
Bakersfield, CA 93311
(661) 883-6268
info@finishlinebikes.com
www.finishlinebikes.com